
PURIFIER (PURIFIER)
Key Features
- Extended on-stream life lowers changeout frequency and operating cost
- Predictable effluent quality supports critical process control
- Retrofit-friendly design simplifies integration into existing multi-round vessels
Overview
Purifier Series cartridge filters deliver consistent, high-efficiency particulate removal across diverse process fluids.
How It Works
Process fluid passes through a high-surface-area media pack that progressively captures contaminants while allowing clean fluid to exit the core
Applications
- •Absolute clarification of process water, final filter ahead of membranes or critical use points
- •Acid/base polishing in chemical processing (material-dependent selection)
- •Amine and glycol loop protection (amine treating, MEG/TEG recon)
- •Hydrocarbon and fuel particulate control (diesel, jet, solvents—verify compatibility)
- •Brine filtration in salt/chemical operations
- •Organic solvent filtration in coatings/chemical plants
FAQs
- •
What applications is the Purifier Series designed for?
The Purifier Series is designed for process water clarification, acid/base polishing, amine and glycol loop protection, hydrocarbon filtration, brine filtration, and organic solvent applications.
- •
Can Purifier cartridges retrofit into existing vessels?
Yes, the Purifier Series is retrofit-friendly and designed to integrate into existing multi-round vessels with various end cap configurations including DOE, 222, 226, and spring seals.
- •
What efficiency does the Purifier Series provide?
The Purifier Series delivers 99.98% efficiency at Beta 5000 for absolute particulate removal from 0.5 to 100 micron.
Physical Specifications
| Parameter | Specification |
|---|---|
| flow direction | Outside-to-inside |
| backwash-able | No |
| outside diameter options | 2.5", 3.0", 3.75", 4.25", 5.0" |
| inner diameter options | 1.1", 1.5", 2.2", 2.5" |
| nominal length options | 10", 20", 30", 40", 36.5" |
| end cap options | DOE, SOE W/ 222, SOE W/ Spring, 222/Fin Single Open End, SOE W/ Internal O-Ring, SOE W/ 226, SOE W/ External O-Ring |
| cores materials | Polypropylene, Tinned steel, Stainless steel |
| caps materials | Polypropylene, Polyester, Tinned steel, Stainless steel |
| outer wrap materials | Polypropylene, Tinned steel, Stainless steel |
| gasket material options | Buna-N, EPDM, Viton |
| special notes | Additional sizes/lengths available, please contact Fil-Trek |
Media Specifications
| Parameter | Specification |
|---|---|
| media primary options | Cellulose, Polypropylene, Microglass, Polyester, Nylon |
| micron ratings | 0.5, 2, 5, 10, 20, 40, 70, 100 |
| efficiency percent | 99.98% |
| media rating | Absolute |
| beta ratio | 5000 |
| changeout dp | 35 PSID |
| burst pressure | 50 PSID |
| max temperature | 185°F |
| approvals certifications | None |
Housing Compatibility
Choose a listed housing with dimensions, end fittings, seals and flow configuration that match the selected element.
- GL Series Filter Housing
- EGL Series Filter Housing
- GLH Series Filter Housing
- EAQ Series Filter Housing
- FRP Series Filter Housing
- FRPH Series Filter Housing
- HPI Series Filter Housing
- HT Series Filter Housing
- L Series Filter Housing
- UPW Series Filter Housing
- LH Series Filter Housing
- MP Series Filter Housing
- MPH Series Filter Housing
- LM Series Filter Housing
- M Series Filter Housing
- MSO Series Filter Housing
- PF Series Filter Housing
Build Your Model Code
___-___-___-___-___-___-___P250-PO-5-30-PO-E2-BN