EGL Series Filter Housing
Multi-cartridgeNon-Code
Key Features
- Industrial non-code design identified in the shared GL datasheet.
- Swing bolt closure for cartridge change-out.
- Separate clean and dirty drains.
- Alternative connection layouts and single open end cartridge arrangements are available.
Overview
EGL is the industrial non-code version of the GL multi-cartridge housing. It uses the GL family’s cartridge arrangement and swing bolt access, with flanged or NPT connections. The shared GL datasheet identifies the E prefix as the non-code design; cartridge ends, seals and vessel materials are selected for the service.
Applications
- •Air & Gas
- •Desalination
- •Coolant
- •Water
- •Electronics
- •Coatings
- •Oil & Gas
- •Chemical
- •Pulp & Paper
- •Power
- •Marine
- •Equipment
Specifications
| Parameter | Specification |
|---|---|
| inlet outlet | Flange or NPT |
| dirty drain | 1/2" NPT on GL10 and smaller, 2" NPT on GL12 and larger |
| clean drain | 1/2" NPT on GL10 and smaller, 2" NPT on GL12 and larger |
| vent | ½" NPT on all sizes |
| gauges | ½" NPT on all sizes |
| cover | Flat top cover on GL10 and smaller (std) |
| closure | Swing bolt closure, CSYZP |
| headlift | Mechanical Davit on GL12 and larger (std), Hydraulic Davit on GL40 and larger (std) |
| legs | Welded angle iron legs w/ footpads |
| standard pressure | 150 PSIG, *Other pressures available |
| standard temperature | 250°F (121.1°C), *Other temperatures available |
| material construction | Carbon Steel, Stainless 304, Stainless 316 |
| certifications | Non-Code |
| internal lining | None |
| special service | None |
| feature | Vertical |
| max temperature | 400°F (204°C) |
* Indicates standard configuration
Options
| Parameter | Specification |
|---|---|
| configuration options | (-) A – Side in/side out*, B – In-Line, C – Side in/Bottom out, D – Side in/Side out, Same Side |
| finish options | (-) External paint "National Blue" (std for carbon steel housings)*, (-) Bead Blast (std for stainless steel 304 and 316)*, EP1 – Electro polish Inside/Outside, EP2 – Inside only, EP3 – Outside only, PP – Passivation |
| o ring options | (-) BN – Buna-N*, ED – EPDM, VI – Viton, SI – Silicone, TEV – Teflon encapsulated Viton, TF - Teflon |
| filter configuration | (-) E1 – Double Open End (std)*, E2 –DOE with Gasket Ends, E3 –DOE with 1" Ext. Core, E4 – SOE Flat End 222 Open End, E5 – SOE Fin End 222 Open End, E8 – SOE Plastic Spring Top 222, E9 – SOE Plastic Spring Top |
| accessories | Direct Reading Gauge, DP Gauge, Safety Relief Valves, Vent Valves, Drain Valves, Air Eliminator |
* Indicates standard configuration
Datasheet
Specifications, dimensions, drawings, and ordering information.
Installation, Operation, and Maintenance
Instructions for installing, operating, and maintaining this series.