MSO Series Filter Housing
Multi-cartridgeASMEPED
Key Features
- Swing bolt closure for cartridge access.
- Hinged cover on MSO10 and smaller; mechanical davit on MSO12 and larger.
- Side inlet/bottom outlet is the standard arrangement.
- Reverse-flow modifications and single open end cartridge options are available.
Overview
MSO is an industrial multi-cartridge housing for medium-flow duties. Standard double open end cartridges are arranged in a vertical vessel with side entry and bottom exit. Smaller models use a hinged flat-top cover, while larger models use a domed cover and mechanical davit; reverse-flow modifications are available.
Applications
- •Air & Gas
- •Desalination
- •Coolant
- •Water
- •Electronics
- •Coatings
- •Oil & Gas
- •Chemical
- •Pulp & Paper
- •Power
- •Marine
- •Equipment
Specifications
| Parameter | Specification |
|---|---|
| inlet outlet | 2" - 6" NPT, 2" - 6" Flange |
| dirty drain | 1" NPT* 316 Stainless Steel |
| clean drain | 1" NPT* |
| vent | ½" NPT* |
| gauges | ½" NPT* |
| headlift | Hinge on MSO10 or smaller*, Mechanical Davit on MSO12 and larger* |
| cover | Flat top cover on MSO10 and smaller*, Domed cover on MSO12 and larger* |
| legs | Angle Iron Legs with footpads* |
| closure | Swing bolt closure* |
| standard pressure | 150psi |
| standard temperature | 400°F (204°C) |
| material construction | Carbon Steel, Stainless 304, Stainless 316, Duplex 2205, Super Duplex 2507, Hastelloy C276, Monel 400 |
| certifications | ASME, PED, CRN |
| internal lining | None, Ceramic, Epoxy, PFA, ETFE (i.e. Tefzel), ECTFE (i.e. Halar), PVDF (i.e. Kynar), Rubber Lined |
| special service | None, Sour Service, Lethal Service |
| feature | Vertical |
| max temperature | 400°F (204°C) |
* Indicates standard configuration
Options
| Parameter | Specification |
|---|---|
| configuration options | C – Side in/Bottom out* |
| finish options | External paint "National Blue" (std for carbon steel housings)*, Bead Blast (std for stainless steel 304 and 316)*, EP1 – Electro polish Inside/Outside, EP2 – Inside only, EP3 – Outside only, PP – Passivation |
| o ring options | BN – Buna-N, ED – EPDM, VI – Viton, SI – Silicone, TEV – Teflon encapsulated Viton, TF - Teflon |
| filter configuration | E1 – Double Open End (std), E2 –DOE with Gasket Ends, E3 –DOE with 1" Ext. Core, E4 – SOE Flat End 222 Open End, E5 – SOE Fin End 222 Open End, E8 – SOE Plastic Spring Top 222, E9 – SOE Plastic Spring Top |
| accessories | Direct Reading Gauge, DP Gauge, Safety Relief Valves, Vent Valves, Drain Valves, Air Eliminator |
| reverse flow | Housings can be modified to accommodate reverse flow applications. |
* Indicates standard configuration
Datasheet
Specifications, dimensions, drawings, and ordering information.