HPI Series Filter Housing
Multi-cartridgeASMENSF 61
Key Features
- High Purity & Crevice Free
- Accepts 2.5" OD cartridge filters
- SS304 or SS316
- NSF/ANSI/CAN 61 certification available for SS304 and SS316
Overview
HPI is designed for sanitary and high-purity cartridge filtration. The housing accepts standard cartridges and offers crevice-free welding where required. SS316 external components, optional electropolishing to the stated 32 Ra finish and a side inlet/bottom outlet layout support a cleanable process installation.
Applications
- •Air & Gas
- •Desalination
- •Coolant
- •Water
- •Electronics
- •Coatings
- •Oil & Gas
- •Chemical
- •Pulp & Paper
- •Power
- •Marine
- •Equipment
Specifications
| Parameter | Specification |
|---|---|
| inlet outlet | 2" - 6" NPT, 2" - 16" Flange |
| dirty drain | 1" NPT* |
| clean drain | 1" NPT* |
| vent | ½" NPT* |
| gauges | ½" NPT* |
| headlift | Hinge on HPI10 or smaller*, Mechanical davit on HPI12 and larger*, Hydraulic davit on HPI40 and larger* |
| cover | Flat top cover on HPI10 and smaller*, Domed cover on HPI12 and larger* |
| legs | Angle iron legs with footpads* |
| closure | Swing bolt closure*, Bolting SS316 w/ Xylan coated nuts |
| standard pressure | 150psi |
| standard temperature | 400°F (204°C) |
| material construction | Carbon Steel, Stainless 304, Stainless 316, Duplex 2205, Super Duplex 2507, Hastelloy C276, Monel 400 |
| certifications | ASME, NSF 61, PED, CRN |
| internal lining | None, Ceramic, Epoxy, PFA, ETFE (i.e. Tefzel), ECTFE (i.e. Halar), PVDF (i.e. Kynar) |
| special service | None |
| feature | Vertical |
| max temperature | 400°F (204°C) |
* Indicates standard configuration
Options
| Parameter | Specification |
|---|---|
| configuration options | C – Side in/Bottom out* |
| finish options | Bead Blast (std for stainless steel 304 and 316)*, EP1 – Electro polish Inside/Outside, EP2 – Inside only, EP3 – Outside only, PP – Passivation |
| o ring options | BN – Buna-N*, ED – EPDM, VI – Viton, SI – Silicone, TEV – Teflon encapsulated Viton, TF - Teflon |
| filter configuration | E1 – Double Open End (std)*, E2 –DOE with Gasket Ends, E3 –DOE with 1" Ext. Core, E4 – SOE Flat End 222 Open End, E5 – SOE Fin End 222 Open End, E8 – SOE Plastic Spring Top 222, E9 – SOE Plastic Spring Top |
| accessories | Direct Reading Gauge, DP Gauge, Safety Relief Valves, Vent Valves, Drain Valves, Air Eliminator |
| reverse flow | Housings can be modified to accommodate reverse flow applications. |
* Indicates standard configuration
Datasheet
Specifications, dimensions, drawings, and ordering information.
Installation, Operation, and Maintenance
Instructions for installing, operating, and maintaining this series.