GL Series Filter Housing

Multi-cartridgeASMENSF 61

Key Features

Universal 2.5" OD cartridge filter housing
ASME design/non-code
NSF/ANSI/CAN 61 certification available for SS304 and SS316

Request Quote Download Datasheet

Overview

GL housings provide a vertical vessel for industrial cartridge filtration, with models accommodating double open end cartridges in four standard lengths. Flanged or threaded connections and several nozzle layouts let the housing fit the installation. Single open end arrangements, alternative seals and specialized materials are available to suit the application.

Applications

•Air & Gas
•Desalination
•Coolant
•Water
•Electronics
•Coatings
•Oil & Gas
•Chemical
•Pulp & Paper
•Power
•Marine
•Equipment

Specifications

Specifications
Parameter	Specification
inlet outlet	Flange or NPT
dirty drain	1/2" NPT on GL10 and smaller, 2" NPT on GL12 and larger
clean drain	1/2" NPT on GL10 and smaller, 2" NPT on GL12 and larger
vent	½" NPT on all sizes
gauges	½" NPT on all sizes
cover	Flat top cover on GL10 and smaller (std)
closure	Swing bolt closure, CSYZP
headlift	Mechanical Davit on GL12 and larger (std), Hydraulic Davit on GL40 and larger (std)
legs	Welded angle iron legs w/ footpads
standard pressure	150 PSIG, *Other pressures available
standard temperature	250°F (121.1°C), *Other temperatures available
material construction	Carbon Steel, Stainless 304, Stainless 316, Duplex 2205, Super Duplex 2507, Hastelloy C276, Monel 400
certifications	ASME, NSF 61, PED, CRN
internal lining	None, Ceramic, Epoxy, PFA, ETFE (i.e. Tefzel), ECTFE (i.e. Halar), PVDF (i.e. Kynar), Rubber Lined
special service	None, Sour Service, Lethal Service
feature	Vertical
max temperature	400°F (204°C)

* Indicates standard configuration

Options

Options
Parameter	Specification
configuration options	(-) A – Side in/side out*, B – In-Line, C – Side in/Bottom out, D – Side in/Side out, Same Side
finish options	(-) External paint "National Blue" (std for carbon steel housings), (-) Bead Blast (std for stainless steel 304 and 316), EP1 – Electro polish Inside/Outside, EP2 – Inside only, EP3 – Outside only, PP – Passivation
o ring options	(-) BN – Buna-N*, ED – EPDM, VI – Viton, SI – Silicone, TEV – Teflon encapsulated Viton, TF - Teflon
filter configuration	(-) E1 – Double Open End (std)*, E2 –DOE with Gasket Ends, E3 –DOE with 1" Ext. Core, E4 – SOE Flat End 222 Open End, E5 – SOE Fin End 222 Open End, E8 – SOE Plastic Spring Top 222, E9 – SOE Plastic Spring Top
accessories	Direct Reading Gauge, DP Gauge, Safety Relief Valves, Vent Valves, Drain Valves, Air Eliminator