MP Series Filter Housing
Multi-cartridgeASMEPED
Key Features
- Multipurpose seat cups accept DOE and 222 cartridge styles.
- Bead blasted exterior and passivated interior/exterior surfaces.
- Swing bolt closure with stainless steel bolting and davit.
- Four nozzle layouts are available, including in-line and side in/bottom out.
Overview
MP provides cartridge filtration for membrane protection in a vertical stainless steel vessel. Multipurpose seat cups accommodate standard double open end or 222 cartridges in 30- or 40-inch lengths. A bead blasted exterior, passivated surfaces and stainless steel bolting and davit are part of the published arrangement.
Applications
- •Air & Gas
- •Desalination
- •Coolant
- •Water
- •Electronics
- •Coatings
- •Oil & Gas
- •Chemical
- •Pulp & Paper
- •Power
- •Marine
- •Equipment
Specifications
| Parameter | Specification |
|---|---|
| inlet outlet | 3" Flange - 20" Flange* |
| dirty drain | 2"NPT* |
| clean drain | 2"NPT* |
| vent | ½" NPT* |
| gauges | ½" NPT |
| material construction | Carbon Steel, Stainless 304, Stainless 316, Duplex 2205, Super Duplex 2507, Hastelloy C276, Monel 400 |
| certifications | ASME, PED, CRN, NSF 61 |
| internal lining | None, Ceramic, Epoxy, PFA, ETFE (i.e. Tefzel), ECTFE (i.e. Halar), PVDF (i.e. Kynar), Rubber Lined |
| special service | None, Sour Service, Lethal Service |
| feature | Vertical |
| max temperature | 400°F (204°C) |
* Indicates standard configuration
Options
| Parameter | Specification |
|---|---|
| configuration options | A – Side in/side out*, B – In-Line, C – Side in/Bottom out, D – Side in/Side out, Same Side |
| finish options | (-) – Bead Blast*, (-) – Passivation*, EP1 – Electro polish Inside/Outside, EP2 – Inside only, EP3 – Outside only |
| o ring options | (-) – Buna-N*, ED – EPDM, VI – Viton, SI – Silicone, TEV – Teflon encapsulated Viton, TF - Teflon |
| head lift options | Mechanical davit — confirm availability for the selected MP size, Hydraulic davit — confirm availability for the selected MP size, K3 – Hydraulic head lift, *Other head lift options available |
| filter configuration | E1 – Double Open End (std)*, E2 –DOE with Gasket Ends, E3 –DOE with 1" Ext. Core, E4 – SOE Flat End 222 Open End, E5 – SOE Fin End 222 Open End, E8 – SOE Plastic Spring Top 222, E9 – SOE Plastic Spring Top |
| accessories | Direct Reading Gauge, DP Gauge, Safety Relief Valves, Vent Valves, Drain Valves, Air Eliminator |
* Indicates standard configuration
Datasheet
Specifications, dimensions, drawings, and ordering information.
Installation, Operation, and Maintenance
Instructions for installing, operating, and maintaining this series.