HT Series Filter Housing
Multi-cartridgeASMEPED
Key Features
- ANSI blind flange flat-top cover with through-bolt closure.
- Inlet and outlet nozzles are extended by 6 inches to accommodate insulation.
- Mechanical davit on HT10 and larger; handled cover on smaller models.
- DOE cartridges or 1-inch NPT single open end configurations can be specified.
Overview
HT is a multi-cartridge housing for high-temperature process fluids such as heat transfer oils. The ANSI blind flange cover uses through-bolts, while extended inlet and outlet nozzles leave room for protective insulation. The vessel’s pressure class, gasket and filter element must be selected together for the required temperature.
Applications
- •Air & Gas
- •Chemical
- •Pulp & Paper
- •Electronics
- •Coatings
- •Oil & Gas
- •Coolant
- •Power
- •Marine
- •Equipment
Specifications
| Parameter | Specification |
|---|---|
| inlet outlet | 2" – 6" Flange |
| dirty drain | 1" NPT |
| clean drain | 1" NPT |
| vent | ½" NPT* |
| gauges | ½" NPT* |
| headlift | Cover w/ handle on HT 8" or smaller, Mechanical Davit on HT 10" or larger |
| cover | ANSI Blind Flange flat top cover |
| closure | Thru-bolt assemblies, carbon steel zinc plated |
| legs | Angle Iron Legs w/ Footpads |
| standard pressure | See the Pressure & Temperature Designation table in the downloadable HT datasheet for the selected pressure class and material. |
| standard temperature | See the Pressure & Temperature Designation table in the downloadable HT datasheet for the selected pressure class and material. |
| material construction | Carbon Steel, Stainless 304, Stainless 316, Duplex 2205, Super Duplex 2507, Hastelloy C276, Monel 400 |
| certifications | ASME, PED, CRN |
| internal lining | None, Ceramic, Epoxy, PFA, ETFE (i.e. Tefzel), ECTFE (i.e. Halar), PVDF (i.e. Kynar), Rubber Lined |
| special service | None, Sour Service, Lethal Service |
| feature | Vertical |
| max temperature | 400°F (204°C) |
* Indicates standard configuration
Options
| Parameter | Specification |
|---|---|
| configuration options | (-) Side in/side out* |
| finish options | (-) High-temperature primer; paint available upon request (standard for carbon steel housings)*, (-) Bead Blast (standard for SS304 and SS316)* |
| gasket options | (-) - Flexitallic*, Garlon, Other materials available upon request |
| filter configuration | (-) E1 – Double Open End (std)*, E12 - SOE w/ 1" NPT |
| accessories | Direct Reading Gauge, DP Gauge, Safety Relief Valves, Vent Valves, Drain Valves, Air Eliminator |
* Indicates standard configuration
Datasheet
Specifications, dimensions, drawings, and ordering information.