EAQ Series Filter Housing
Multi-cartridgeNon-Code
Key Features
- Fully welded construction with a flat bottom.
- Universal bottom cups accept DOE and SOE 222 cartridge arrangements.
- Swing bolt closure and angle legs with footpads.
- Bead blasted finish; Buna-N seals are standard with alternatives available.
Overview
EAQ is a non-code stainless steel housing for commercial and industrial liquid filtration. Five vessel sizes accommodate 5, 9, 12, 19 or 25 cartridges. Universal bottom cups accept double open end and 222 single open end configurations, while the flat bottom and swing bolt closure provide a straightforward service arrangement.
Applications
- •Air & Gas
- •Desalination
- •Coolant
- •Water
- •Electronics
- •Coatings
- •Oil & Gas
- •Chemical
- •Pulp & Paper
- •Power
- •Marine
- •Equipment
Specifications
| Parameter | Specification |
|---|---|
| inlet outlet | Flange or NPT |
| dirty drain | 1" NPT |
| clean drain | 1/2" NPT |
| vent | 1/2" NPT on all sizes |
| gauges | 1/2" NPT on all sizes |
| closure | Swing bolt closure |
| legs | Angle foot pad leg |
| external finish | Bead Blast |
| o ring | Buna-N (standard), EPDM, Viton, and other materials available upon request |
| standard pressure | 150PSIG |
| standard temperature | 250°F (121.1°C) |
| media | Accepts DOE (E1, E2) and SOE 222 (E4, E5) element configurations |
| other features | Universal bottom cups; Fully welded construction throughout; Flat bottom design |
| material construction | Stainless 304, Stainless 316 |
| certifications | Non-Code |
| internal lining | None |
| special service | None |
| feature | Vertical |
| max temperature | 400°F (204°C) |
Options
| Parameter | Specification |
|---|---|
| accessories | Direct Reading Gauge – Indicates internal pressure; used to monitor when maintenance is required, Differential Pressure Gauge – Monitors pressure drop across the housing to indicate filter change-out, Safety Relief Valve – Pressure protection, Vent Valve – Manual or automatic venting, Drain Valve / Ball Valve – Dirty drain and clean drain; also usable as block-off or divert valves, Air Eliminator – Removes trapped air when filling the vessel; closes automatically at maximum liquid capacity, Flange Adapters – 2F adapter available for 2P (NPT) connection versions on EAQ08 and EAQ10 |
Datasheet
Specifications, dimensions, drawings, and ordering information.