TL Series Filter Housing
Key Features
- Top inlet directs liquid through the cover
- Swing-bolt closure for bag changes
- Mesh-lined basket and surface-finish options
Overview
The TL Series routes incoming liquid directly through the top cover into the bag. Size 2 (7" x 32") is the standard bag; Size 1 (7" x 16") is also accepted. A bottom outlet, swing-bolt closure and removable support basket provide a straightforward arrangement for industrial bag filtration.
Applications
- •Air & Gas
- •Desalination
- •Coolant
- •Water
- •Electronics
- •Coatings
- •Oil & Gas
- •Chemical
- •Pulp & Paper
- •Power
- •Marine
- •Equipment
FAQs
- •
What is the advantage of top-entry design?
The TL top-entry design with top-in, bottom-out flow prioritizes tight sealing and straightforward maintenance access, ideal for applications where positive seal and easy bag changes are critical.
- •
What bag sizes fit the TL housing?
The TL Series accepts Size 1 (7" x 16") and Size 2 (7" x 32") filter bags. Size 2 is the standard size.
- •
What certifications are available?
TL housings are available with ASME U-stamp, PED (European), and CRN (Canadian) certifications in carbon steel or various alloys.
Specifications
| Parameter | Specification |
|---|---|
| inlet outlet | 2" Flange or 2" NPT, *3" available with reducer |
| vent | 1/2" NPT |
| gauges | 1/2" NPT |
| basket | 1/8" on 3/16" perforated plate, *Other basket options available |
| material construction | Carbon Steel, Stainless 304, Stainless 316, Duplex 2205, Super Duplex 2507, Hastelloy C276, Monel 400 |
| certifications | ASME, PED, CRN |
| internal lining | None |
| special service | None |
| feature | Top In, Bottom Out |
| max temperature | 400°F (204°C) |
Options
| Parameter | Specification |
|---|---|
| configuration options | (-) C – Top in/Bottom out* |
| basket options | (-) – 1/8" on 3/16" perforated basket*, MB____ – Mesh lined basket (insert mesh size in blank space) |
| finish options | (-) – Paint "National Blue" (std for CS)*, (-) – Bead Blast (std for SS304/SS316)*, EP1 – Electro polish Inside/Outside, EP2 – Inside only, EP3 – Outside only, PP – Passivation |
| o ring options | (-) – Buna-N*, ED – EPDM, VI – Viton, SI – Silicone, TEV – Teflon encapsulated Viton |
| design pressure options | 150 PSIG*, 275 PSIG available |
| accessories | Direct Reading Gauge, DP Gauge, Safety Relief Valves, Vent Valves, Drain Valves, Air Eliminator, Omega Springs, Balloon/Liquid Displacer, Bag Magnets |
* Indicates standard configuration
Datasheet
Specifications, dimensions, drawings, and ordering information.