HSL Series Filter Housing
Single BagASMEPED
Key Features
- High-pressure single-bag design
- Swing-bolt, ANSI bolted, threaded and yoke closure options
- Sour-service design available
Overview
The HSL Series adapts the single-bag housing format for higher-pressure duties. It accepts a Size 2 bag and offers ANSI 300 or 600 flanged connections. Sour-service construction and alternative closures are available by specification.
Applications
- •Air & Gas
- •Desalination
- •Coolant
- •Water
- •Electronics
- •Coatings
- •Oil & Gas
- •Chemical
- •Pulp & Paper
- •Power
- •Marine
- •Equipment
Specifications
| Parameter | Specification |
|---|---|
| inlet outlet | 2" - 4", 300# RFWN Flange |
| connection types | 600# RFWN Flange, *Higher pressure units available upon request |
| vent | 1/2" 3000# NPT |
| gauges | 1/2" 3000# NPT |
| material construction | Carbon Steel, Stainless 304, Stainless 316, Duplex 2205, Super Duplex 2507, Hastelloy C276, Monel 400 |
| certifications | ASME, PED, CRN |
| internal lining | None, Ceramic, Epoxy, PFA, ETFE (i.e. Tefzel), ECTFE (i.e. Halar), PVDF (i.e. Kynar), Rubber Lined |
| special service | None, Sour Service, Lethal Service |
| feature | High Pressure & Temperature |
| max temperature | 400°F (204°C) |
Options
| Parameter | Specification |
|---|---|
| configuration options | (-) – Side in/Bottom out*, A – Side in/side out, D – Side in/out Same Side |
| basket options | (-) – 1/8" on 3/16" perforated basket*, MB____ – Mesh lined basket (insert mesh size in blank space) |
| finish options | (-) – Paint "National Blue" (std for CS)*, (-) – Bead Blast (std for SS304/SS316)*, EP1 – Electro polish Inside/Outside, EP2 – Inside only, EP3 – Outside only, PP – Passivation |
| o ring options | (-) – Buna-N*, ED – EPDM, VI – Viton, SI – Silicone, TEV – Teflon encapsulated Viton |
| service options | (-) – None*, SR – Sour service; confirm required design changes with Fil-Trek |
| closure assembly options | (-) –Swing Bolt*, H6 - ANSI Closure, H10 - Quick Open Closure - Threaded, H9 - Quick Open Closure - Yoke |
| accessories | Direct Reading Gauge, DP Gauge, Safety Relief Valves, Vent Valves, Drain Valves, Air Eliminator, Omega Springs, Balloon/Liquid Displacer, Bag Magnets |
* Indicates standard configuration
Datasheet
Specifications, dimensions, drawings, and ordering information.