ELP Series Filter Housing
Multiple BagNon-Code
Key Features
- Swing-bolt closure for bag changeout
- Mechanical or hydraulic davit selected by vessel size
- Perforated support baskets; mesh-lined baskets available
Overview
The ELP is the economical, non-code version of the highly configurable LP (Low Profile) multi-bag housing. The E prefix identifies its non-code design. Its layout permits bag removal without ladders or platforms. Side-in/side-out is the standard arrangement, with inline, bottom-outlet and same-side connections also listed in the datasheet.
Applications
- •Air & Gas
- •Desalination
- •Coolant
- •Water
- •Electronics
- •Coatings
- •Oil & Gas
- •Chemical
- •Pulp & Paper
- •Power
- •Marine
- •Equipment
Specifications
| Parameter | Specification |
|---|---|
| inlet outlet | 2" Flange -18" Flange |
| dirty drain | ½" NPT on all sizes* |
| clean drain | 2" NPT on all sizes* |
| vent | ½" NPT on all sizes* |
| gauges | ½" NPT on all sizes* |
| basket | 1⁄8" on 3⁄16" perforated plate*, *Other basket options available |
| headlift | Mechanical Davit (std) for up to LP38*, Hydraulic Davit on LP40 and larger* |
| legs | Angle Iron Legs with footpads* |
| closure | Swing bolt closure* |
| standard pressure | 150 PSI |
| standard temperature | 250°F (121.1°C) |
| material construction | Carbon Steel, Stainless 304, Stainless 316 |
| certifications | Non-Code |
| internal lining | None |
| special service | None |
| feature | Configurable |
| max temperature | 400°F (204°C) |
* Indicates standard configuration
Options
| Parameter | Specification |
|---|---|
| configuration options | (-) A – Side in/side out*, B – In-Line side in/side out, C – Side in/Bottom out, D – Side in/Side out, Same Side |
| basket options | 1/8" on 3/16" perforated basket*, MB____ - Mesh lined basket (insert mesh size in open space) |
| finish options | (-) Paint "National Blue" (std for CS) *, (-) Bead Blast (std for SS304 or SS316) *, EP1 – Electro polish Inside/Outside, EP2 – Inside only, EP3 – Outside only, PP – Passivation |
| o ring options | (-) Buna-N*, ED – EPDM, VI – Viton, SI – Silicone, TEV – Teflon encapsulated Viton |
| accessories | Direct Reading Gauge, DP Gauge, Safety Relief Valves, Vent Valves, Drain Valves, Air Eliminator, Omega Springs, Balloon/Liquid Displacer, Bag Magnets |
* Indicates standard configuration
Datasheet
Specifications, dimensions, drawings, and ordering information.
Installation, Operation, and Maintenance
Instructions for installing, operating, and maintaining this series.