EBMB Series Filter Housing
Multiple BagNon-Code
Key Features
- Inline bottom connection design
- Swing-bolt closure and davit-assisted cover access
- Perforated support baskets with optional mesh lining
Overview
The EBMB is the economical, non-code version of the BMB (Bottom In, Bottom Out) housing, with inlet and outlet nozzles positioned low on the vessel and in line with each other. The E prefix identifies its non-code design. Bags are accessed through a swing-bolt cover without ladders or platforms. Model sizes, connection sizes and bag quantities can be selected to suit the process.
Applications
- •Air & Gas
- •Desalination
- •Coolant
- •Water
- •Electronics
- •Coatings
- •Oil & Gas
- •Chemical
- •Pulp & Paper
- •Power
- •Marine
- •Equipment
Specifications
| Parameter | Specification |
|---|---|
| inlet outlet | 2" Flange -18" Flange |
| dirty drain | ½" NPT on all sizes* |
| clean drain | 2" NPT on all sizes* |
| vent | ½" NPT on all sizes* |
| gauges | ½" NPT on all sizes* |
| basket | 1/8" on 3/16" perforated plate*, *Other basket options available |
| headlift | Mechanical Davit (std) for up to BMB38*, Hydraulic Davit on BMB40 and larger* |
| legs | Angle Iron Legs with footpads* |
| closure | Swing bolt closure* |
| standard pressure | 150 PSI |
| standard temperature | 250°F (121.1°C) |
| material construction | Carbon Steel, Stainless 304, Stainless 316 |
| certifications | Non-Code |
| internal lining | None |
| special service | None |
| feature | Bottom In & Out |
| max temperature | 400°F (204°C) |
* Indicates standard configuration
Options
| Parameter | Specification |
|---|---|
| basket options | (-) – 1/8" on 3/16" perforated basket*, MB__ - Mesh lined basket (insert mesh size in open space) |
| finish options | (-) – External paint "National Blue"* (for carbon steel housings), (-) – Bead Blast* (for stainless steel 304 and 316), EP1 – Electro polish Inside/Outside, EP2 – Inside only, EP3 – Outside only, PP – Passivation |
| o ring options | (-) – Buna-N*, ED – EPDM, VI – Viton, SI – Silicone, TEV – Teflon encapsulated Viton |
| head lift options | (-) – K1 – Head lift (standard 18" +)*, K2 – Hinge (standard 16")*, K3 – Hydraulic Jack Davit Side, K4 – Hydraulic Jack Davit Top |
| accessories | Direct Reading Gauge, DP Gauge, Safety Relief Valves, Vent Valves, Drain Valves, Air Eliminator, Omega Springs, Balloon/Liquid Displacer, Bag Magnets |
* Indicates standard configuration
Datasheet
Specifications, dimensions, drawings, and ordering information.