GLH Series Filter Housing

Multi-cartridgeASMENSF 61

Key Features

Universal 2.5" OD cartridge filter housing
Horizontal, ASME Design / Industrial Design
NSF/ANSI/CAN 61 certification available for SS304 and SS316

Request Quote Download Datasheet

Overview

GLH places the GL-style cartridge filtration arrangement in a horizontal vessel. The standard top inlet and end outlet can be replaced by a side inlet and end outlet to suit plant piping. Swing bolt access and headlift options support servicing, while cartridge diameter, length and count are selected for the required duty.

Applications

•Air & Gas
•Desalination
•Coolant
•Water
•Electronics
•Coatings
•Oil & Gas
•Chemical
•Pulp & Paper
•Power
•Marine
•Equipment

Specifications

Specifications
Parameter	Specification
inlet outlet	Flange or NPT
dirty drain	1" NPT on GLH16 and smaller, 2" NPT on GLH18 and larger
clean drain	1" NPT on GLH16 and smaller, 2" NPT on GLH18 and larger
vent	½" NPT on all sizes
gauges	½" NPT on all sizes
closure	Swing bolt closure, CSYZP
headlift	Mechanical Davit on GLH12 and larger, (std), Hydraulic Davit on GLH40 and larger (std)
legs	Welded angle iron legs w/ footpads
standard pressure	150 PSIG, *Other pressures available
standard temperature	250°F (121.1°C), *Other temperatures available
material construction	Carbon Steel, Stainless 304, Stainless 316, Duplex 2205, Super Duplex 2507, Hastelloy C276, Monel 400
certifications	ASME, NSF 61, PED, CRN
internal lining	None, Ceramic, Epoxy, PFA, ETFE (i.e. Tefzel), ECTFE (i.e. Halar), PVDF (i.e. Kynar), Rubber Lined
special service	None, Sour Service, Lethal Service
feature	Horizontal
max temperature	400°F (204°C)

* Indicates standard configuration

Options

Options
Parameter	Specification
configuration options	(-) E - Top In/End Out*, C - Side In/End Out
finish options	(-) External paint "National Blue" (standard for carbon steel), (-) Bead Blast (standard for stainless steel 304 and 316), EP1 – Electro polish Inside/Outside, EP2 – Inside only, EP3 – Outside only, PP – Passivation
o ring options	(-) BN – Buna-N*, ED – EPDM, VI – Viton, SI – Silicone, TEV – Teflon encapsulated Viton, TF – Teflon
head lift options	(-) K1 – Head lift*, K2 – Hinge
filter configuration	(-) E1 - Double Open End*, E2 –DOE with Gasket Ends, E3 –DOE with 1" Ext. Core, E4 – SOE Flat End 222 Open End, E5 – SOE Fin End 222 Open End, E8 – SOE Plastic Spring Top 222, E9 – SOE Plastic Spring Top
accessories	Direct Reading Gauge, DP Gauges, Safety Relief Valves, Vent Valves, Drain Valves, Air Eliminator