TW Series Filter Housing
Multiple Bag/Ultraflow (High Flow)ASMEPED
Key Features
- Accepts TW bags or Ultra Flow cartridges
- Horizontal vessel supported on saddles and a skid
- Swing-bolt closure for element replacement
Overview
The TW Series accepts TW bags or Fil-Trek 6 in. outside-diameter Ultra Flow cartridges in a single horizontal vessel. A skid-supported layout and swing-bolt closure provide access for element changes, with model sizes spanning 2 to 40 filters.
Applications
- •Air & Gas
- •Desalination
- •Coolant
- •Water
- •Electronics
- •Oil & Gas
- •Chemical
- •Pulp & Paper
- •Power
- •Coatings
Specifications
| Parameter | Specification |
|---|---|
| inlet outlet | Flange |
| dirty drain | 2" NPT |
| clean drain | 2" NPT |
| vent | ½" NPT on all sizes |
| gauges | ½" NPT on all sizes |
| closure | Swing bolt closure |
| legs | Saddles |
| standard pressure | 150 PSI, *Other pressures available |
| standard temperature | 250°F (121.1°C), *Other temperatures available |
| material construction | Carbon Steel, Stainless 304, Stainless 316, Duplex 2205, Super Duplex 2507, Hastelloy C276, Monel 400 |
| certifications | ASME, PED, CRN |
| internal lining | None, Ceramic, Epoxy, PFA, ETFE (i.e. Tefzel), ECTFE (i.e. Halar), PVDF (i.e. Kynar), Rubber Lined |
| special service | None, Sour Service, Lethal Service |
| feature | TW Bag Filter Compatible |
| max temperature | 400°F (204°C) |
* Indicates standard configuration
Options
| Parameter | Specification |
|---|---|
| finish options | (-) Bead Blast*, EP1 – Electro polish Inside/Outside, EP2 – Inside only, EP3 – Outside only, PP – Passivation |
| o ring options | (-) – BN – Buna-N*, ED – EPDM, VI – Viton |
| accessories | Direct Reading Gauge, DP Gauge, Safety Relief Valves, Vent Valves, Drain Valves, Air Eliminator |
* Indicates standard configuration
Datasheet
Specifications, dimensions, drawings, and ordering information.