UFH Series Filter Housing
Multi-elementASMENSF 61
Key Features
- Flow rates up to 9,000 GPM
- ASME Design/Industrial Design
- NSF/ANSI/CAN 61 certification available for SS304 and SS316
Overview
The UFH Series holds multiple Ultra Flow cartridges in a horizontal vessel. Its removable baskets support straightforward element changes, and the standard top-in/end-out layout can be changed to side-in/end-out to suit the installation. The datasheet describes flow capability up to 9,000 GPM; final sizing depends on cartridge length and the process fluid.
Applications
- •Air & Gas
- •Desalination
- •Coolant
- •Water
- •Electronics
- •Coatings
- •Oil & Gas
- •Chemical
- •Pulp & Paper
- •Power
- •Marine
- •Equipment
Specifications
| Parameter | Specification |
|---|---|
| inlet outlet | 3" Flange -24" Flange |
| clean drain | 2" NPT |
| vent | ½" NPT |
| gauges | ½" NPT |
| closure | Swingbolt & ANSI Thru-bolt closure |
| material construction | Carbon Steel, Stainless 304, Stainless 316, Duplex 2205, Super Duplex 2507, Hastelloy C276, Monel 400 |
| certifications | ASME, NSF 61, PED, CRN |
| internal lining | None, Ceramic, Epoxy, PFA, ETFE (i.e. Tefzel), ECTFE (i.e. Halar), PVDF (i.e. Kynar), Rubber Lined |
| special service | None, Sour Service, Lethal Service |
| feature | Inside-Out High Flow |
| max temperature | 400°F (204°C) |
Options
| Parameter | Specification |
|---|---|
| configuration options | (-) E - Top In/End Out*, C - Side In/End Out |
| finish options | (-) - External paint "National Blue" (std for CS), (-) – Bead Blast (std for SS304 and SS316), EP1 – Electro polish Inside/Outside, EP2 – Inside only, EP3 – Outside only, PP – Passivation |
| o ring options | (-) – Buna-N*, ED – EPDM, VI – Viton, SI – Silicone, TF – Teflon |
| closure assembly options | (-) Mechanical Davit, (std for UFH12 and larger)*, (-) Hydraulic Davit, (std for UFH40 and larger)*, K3 – Hydraulic Jack Davit Side, K4 – Hydraulic Jack Davit Top, *See pages 5–6 of the downloadable UFH datasheet for other closure options |
| accessories | Direct Reading Gauge, DP Gauge, Safety Relief Valves, Vent Valves, Drain Valves, Air Eliminator |
| other options | Stainless Steel bolting, Passivation, Electropolished, Inside/Out, Skid Mounting, Duplexing |
* Indicates standard configuration
Datasheet
Specifications, dimensions, drawings, and ordering information.
Installation, Operation, and Maintenance
Instructions for installing, operating, and maintaining this series.