VF Series Filter Housing
Multi-cartridgeASMEPED
Key Features
- Accepts 300, 400, 600 and 700 Series oil filter elements.
- Multiple stack arrangements are available.
- Swing bolt closure with SS304 bolting and davit.
- Threaded rod or distributor tube element support options.
- In-line, side in/side out and same-side connection layouts.
Overview
VF is a multi-round oil filter vessel that accommodates several oil-element families and stack arrangements. Swing bolt access, stainless steel bolting and a davit support element change-out. In-line, offset side-entry and same-side connections, plus different element support arrangements, allow the vessel to be configured around the process.
Applications
- •Air & Gas
- •Oil & Gas
- •Chemical
- •Coolant
Specifications
| Parameter | Specification |
|---|---|
| dirty drain | 2" NPT |
| clean drain | 2" NPT |
| vent | ½" NPT |
| gauges | ½" NPT |
| material construction | Carbon Steel, Stainless 304, Stainless 316, Duplex 2205, Super Duplex 2507, Hastelloy C276, Monel 400 |
| certifications | ASME, PED, CRN |
| internal lining | None, Ceramic, Epoxy, PFA, ETFE (i.e. Tefzel), ECTFE (i.e. Halar), PVDF (i.e. Kynar), Rubber Lined |
| special service | None, Sour Service, Lethal Service |
| feature | Vertical |
| max temperature | 400°F (204°C) |
Options
| Parameter | Specification |
|---|---|
| configuration options | (-) - In Line*, A - Side in/Side out, D - Side in/Same side out |
| finish options | (-) - External paint "National Blue"* (Standard for carbon steel housing), (-) - Bead Blast* (Standard for stainless steel 304 and 316), EP1 - Electro polish inside/outside, EP2 - Inside only, EP3 - Outside only, EP4 - Passivation |
| o ring options | (-) - Buna-N*, ED - EPDM, VI - Viton, SI - Silicone, TEV - Teflon encapsulated Viton, TF - Teflon |
| leg options | (-) LT - Leg Tab*, LA - Heavy duty legs |
| head lift options | Davit*, Hinge, Hydraulic Jack |
| bottom & head options | (-) F - Flat bottom (Standard VF10-VF16), (-) L - Domed bottom (Standard VF18 and above) |
| filter support | (-) I1: Threaded Rod*, I2: Distributor Tube |
| other options | Stainless steel bolting, Skid mounting, Duplexing |
| accessories | DP Gauge, Safety Relief Valves, Vent Valves, Drain Valves, Air Eliminator |
* Indicates standard configuration
Datasheet
Specifications, dimensions, drawings, and ordering information.
Installation, Operation, and Maintenance
Instructions for installing, operating, and maintaining this series.