
98 Series Automatic Strainers
Key Features
- Automatic, Motorized Self-Cleaning
- True turn-key design
- Configurable cleaning controls
Overview
Automatic, motorized self-cleaning strainers offering continuous removal of debris while maintaining full-time, uninterrupted flow. Offset inlet/outlet orientation, low pressure losses, and configurable controls allow the unit to adapt to changing process conditions.
How It Works
Unfiltered fluid enters the strainer through the inlet and flows into the centre of a wedge wire strainer basket.
Particulate collects on the screen as clean fluid passes through.
As differential pressure increases to the setpoint, the cleaning cycle initiates automatically.
An internal scraper (blades or brushes) rotates against the screen, removing buildup and directing it to the bottom sump.
A fast-acting blowdown valve opens to flush out collected solids; clean flow is uninterrupted during the cycle.
Clean fluid exits via the outlet toward the next process stage.
Applications
- •Cooling tower closed loop
- •Cooling water, once through (e.g. large Power Gen cooling water intake)
- •Pump-seal cooling water
- •Firewater pump protection
- •Lube oil systems
- •Industrial produced water
- •Renewable fuel feedstock (coarse screening at offloading), (fine screening downstream)
- •Steel mills & foundries, quench water filtration
- •Industrial wash stations (protecting spray nozzles)
- •Produced water & salt water disposal (SWD)
- •Specialty designs available for SWD service
- •Pulp & paper
- •Miscella filtration & separation (-50°F methanol service)
- •Chemical process screening contact us with your application
Control Level Options
L1: Standard Controller
- •Field adjustable: DP setpoint, clean cycle duration, purge duration
- •Manual override
L2: Automatic, configurable
- •Customizable automation package to match your process requirements
L3: Automatic, Hazardous Area
- •Full scope automation package to match your process requirements
Physical Specifications
| Parameter | Specification |
|---|---|
| inlet outlet size range | 1" to 42" (flanged) |
| design pressure note | Up to 1440 PSI (dependent on material and flange rating) |
| ratings | ASME Class 150, ASME Class 300, ASME Class 600 |
| certifications | ASME U, ASME UM, CE, NB, CRN, NSF 61 |
| available materials | Carbon Steel (CS), Stainless Steel 304 (SS304), Stainless Steel 316 (SS316), Hastelloy C276, AL6XN, Duplex 2205, Super Duplex 2507, Monel 400, Titanium |
| screen type | Wedge wire, SS316 standard or match housing MoC |
| screen micron range | 50 to 3,000 micron (increments of 25 micron); 200 micron standard |
| scraper mechanism | Blades, Brushes |
| scraper material note | SS316 standard, or match housing MoC; field-replaceable |
| wetted internal construction | Mechanical shaft seal SS316 or match housing MoC, Internals SS316 standard or match housing MoC |
| max temperature | 400°F (204°C) |
Case Studies

Power & Utilities
High-Volume Cooling Upgrade for Power Generation Facility
Fil-Trek supplied a fully automated strainer system for a 500 MW power plant's 17,000 GPM river water intake stream
Read Case Study → (opens in a new tab)
Pulp & Paper
Seal Water Filtration Upgrade for Pulp and Paper Mill
Fil-Trek engineered a duplex automatic strainer system to prevent heat exchanger fouling in a paper mill’s pump seal-water loop.
Read Case Study → (opens in a new tab)
Model Number Format
[BODY MOC]98-[INLET/OUTLET SIZE][STYLE]-[SCREEN SIZE]-[SCREEN MOC]-[DESIGN PRESSURE]-[CONTROL LEVEL]S698-12F-500-S6-PT1-L1Code Reference
body moc
254254 SMO2205UNS S322052507UNS S32750(blank)Carbon SteelS4Stainless 304S6Stainless 316M4Monel 400H2Hastelloy C276TTitaniuminlet/outlet size
Inlet/Outlet sizeSee Sizing Tablestyle
FFlangedscreen size
Micron rating50–3,000 µm in 25 µm increments; 200 µm standardscreen moc
254254 SMO2205UNS S322052507UNS S32750S6Stainless 316M4Monel 400H2Hastelloy C276TTitaniumpressure temp code
STDSee Pressure Class Tablecontrol level
L1Semi-automaticL2AutomaticL3Custom AutomaticSizing Guidelines
| Flange Size | Flow Rate (GPM) |
|---|---|
| 1" | <100 |
| 2" | <150 |
| 3" | <250 |
| 4" | 300-450 |
| 6" | 600-1,000 |
| 8" | 1,000-2,000 |
| 10" | 2,000-2,500 |
| 12" | 2,500-4,000 |
| 14" | 3,000-5,000 |
| 16" | 4,000-6,000 |
| 18" | 5,000-7,500 |
| 20" | 6,000-9,000 |
| 24" | 8,000-12,500 |
| 30" | 12,500-18,500 |
| 42" | 26,500-36,000 |
Pressure Class Ratings
| Designation | Material | PSI | Temp (°F) | ANSI Rating |
|---|---|---|---|---|
| PT1 | Carbon Steel | 280 | 100 | ANSI 150 |
| PT1 | SS304/SS316 | 270 | 100 | ANSI 150 |
| PT2 | Carbon Steel | 195 | 400 | ANSI 150 |
| PT2 | SS304/SS316 | 185 | 400 | ANSI 150 |
| PT3 | Carbon Steel | 735 | 100 | ANSI 300 |
| PT3 | SS304/SS316 | 715 | 100 | ANSI 300 |
| PT4 | Carbon Steel | 630 | 400 | ANSI 300 |
| PT4 | SS304/SS316 | 490 | 400 | ANSI 300 |
| PT5 | Carbon Steel | 1475 | 100 | ANSI 600 |
| PT5 | SS304/SS316 | 1435 | 100 | ANSI 600 |
| PT6 | Carbon Steel | 1260 | 400 | ANSI 600 |
| PT6 | SS304/SS316 | 990 | 400 | ANSI 600 |