
HelixDepth (HDG)
Gas Particulate FilterDepth
Key Features
- Multi-layer helical depth matrix construction
- Higher dirt-holding capacity for longer run times
- Lowest cost of ownership in the industry
Overview
HelixDepth HDG elements are depth-style cartridges engineered with a gradient-density matrix that captures more particulates, delivers higher dirt-holding capacity, extends service life, and provides the lowest cost of ownership—protecting downstream equipment.
How It Works
Gas flows outside‑to‑inside through a multi‑layer depth matrix. Larger particles are captured on outer layers while fine solids are retained deeper in the structure, maintaining low pressure drop and high solids holding capacity.
Applications
- •Dry gas transmission, processing and storage
- •Compressor suction/discharge
- •Gas gathering
- •Metering / custody transfer
- •Glycol and amine contactor protection
- •Fuel gas
- •Utility & instrument air
- •Removal of fine, deformable, and shear‑sensitive solids such as sand, iron sulfide, iron oxide, pipe scale, dust, salts, asphaltenes, coal fines, paraffins
Physical Specifications
| Parameter | Specification |
|---|---|
| flow direction | Outside-to-inside |
| outside diameter options | 3.0", 4.5", 5.5" |
| inner diameter options | 2.1", 3.1", 4.25" |
| nominal length options | 12", 24", 36", 43", 72" |
| end cap options | Open no gasket, Open metal cap flat gasket |
| top cap options | Open no gasket, Open metal cap flat gasket, Metal cap with 16mm hole |
| inner core materials | None, Metal Core, Stainless Core |
| outer core materials | None, Metal Core, Stainless Core |
| outer wrap materials | Special Order |
| size options | 24, 36, 72, 312, 318, 324, 336, 372, 536, 572 |
| gasket material options | None, Buna-N, EPDM, Viton |
| special notes | 5.5" OD requires metal core |
Media Specifications
| Parameter | Specification |
|---|---|
| media primary options | Polyester, Polypropylene |
| micron ratings | 0.1, 0.3, 0.5, 1, 5, 10 |
| efficiency percent | 99.98 |
| media rating | Absolute |
| beta ratio | 5000 |
| changeout dp | 15 PSID |
| burst pressure | 25 PSID |
| max temperature | Based on material |
| approvals certifications | None |
Housing Compatibility
Choose a listed housing with dimensions, end fittings, seals and flow configuration that match the selected element.
- 70V Series Filter Housing
- 70H Series Filter Housing
- Parker Series 75/85
Competitor Cross-Reference
- Parker Peco PCHG DYNASEP
- Jonell JFS
- Shawndra Sparksfilters SPI-5000
- Shawndra SPI
Build Your Model Code
Your Model Code(0/6 required)
HDG-___-___-___-___-___-___Note: 5.5" OD requires metal core
Example:
HDG-336-PO-0.1-N-N-N