# MPH Series Filter Housing

> Fil-Trek Cartridge Housings. Canonical page: https://www.fil-trek.com/products/cartridge-housings/mph

Category: Cartridge Housings
Series: MPH

## Overview
MPH arranges membrane protection cartridges horizontally and includes a removable internal cartridge support plate. Standard DOE and 222 cartridges seat in multipurpose cups. The stainless steel vessel is bead blasted and passivated, with top or side inlet arrangements and end outlet connections to suit the installation.

## Key Features
- Removable internal cartridge support plate.
- DOE and 222 cartridge seating in multipurpose cups.
- Bead blasted exterior and passivated interior/exterior surfaces.
- Swing bolt closure with stainless steel bolting and davit.
- Top in/end out or side in/end out layouts.

## Applications
- Air & Gas
- Desalination
- Coolant
- Water
- Electronics
- Coatings
- Oil & Gas
- Chemical
- Pulp & Paper
- Power
- Marine
- Equipment

## Specifications
- **inlet outlet:** 3" Flange - 22" Flange*
- **dirty drain:** 2" NPT*
- **clean drain:** 2" NPT*
- **vent:** ½" NPT*
- **gauges:** ½" NPT*
- **standard configuration note:** *Indicates standard configuration
- **material construction:** Carbon Steel, Stainless 304, Stainless 316, Duplex 2205, Super Duplex 2507, Hastelloy C276, Monel 400
- **certifications:** ASME, PED, CRN, NSF 61
- **internal lining:** None, Ceramic, Epoxy, PFA, ETFE (i.e. Tefzel), ECTFE (i.e. Halar), PVDF (i.e. Kynar), Rubber Lined
- **special service:** None, Sour Service, Lethal Service
- **feature:** Horizontal
- **max temperature:** 400°F (204°C)

## Options
- **configuration options:** (-) E - Top In/End Out*, C - Side In/End Out
- **finish options:** (-) - Bead Blast*, (-) - Passivation*, EP1 - Electro polish Inside/Outside, EP2 - Inside only, EP3 - Outside only
- **o ring options:** (-) - Buna-N*, ED - EPDM, SI - Silicone, VI - Viton, TEV - Teflon encapsulated Viton, TF - Teflon
- **head lift options:** (-) Mechanical Davit (std for MPH12 and larger)*, (-) Hydraulic Davit (std for MPH40 and larger)*, K3 - Hydraulic Jack Davit Side, K4 - Hydraulic Jack Davit Top, Other head lift options available
- **filter configuration:** E1 - Double Open End (std)*, E2 - DOE with Gasket Ends, E3 - DOE with 1" Ext. Core, E4 - SOE Flat End 222 Open End, E5 - SOE Fin End 222 Open End, E8 - SOE Plastic Spring Top 222, E9 - SOE Plastic Spring Top
- **accessories:** Direct Reading Gauge, DP Gauge, Safety Relief Valves, Vent Valves, Drain Valves, Air Eliminator
- **standard configuration note:** *Indicates standard configuration

## Downloads
- [Datasheet](https://www.fil-trek.com/products/datasheets/Fil-Trek_Multi-Cartridge-Filter-Housing_MPH_datasheet.pdf)
- [Installation, Operation, and Maintenance](https://www.fil-trek.com/products/datasheets/Fil-Trek_MPH_IOM.pdf)

## Contact
- **sales@fil-trek.com** — all filtration product inquiries, projects, filter housings, and filtration systems
- **filters@fil-trek.com** — replacement filter media, filter elements, filter bags, hardware, and spare parts

## Links
- HTML: https://www.fil-trek.com/products/cartridge-housings/mph
- Markdown: https://www.fil-trek.com/products/cartridge-housings/mph.md
- Category: https://www.fil-trek.com/products/cartridge-housings
- Request Quote: https://www.fil-trek.com/contact?product=mph&category=cartridge-housings