# MP Series Filter Housing

> Fil-Trek Cartridge Housings. Canonical page: https://www.fil-trek.com/products/cartridge-housings/mp

Category: Cartridge Housings
Series: MP

## Overview
MP provides cartridge filtration for membrane protection in a vertical stainless steel vessel. Multipurpose seat cups accommodate standard double open end or 222 cartridges in 30- or 40-inch lengths. A bead blasted exterior, passivated surfaces and stainless steel bolting and davit are part of the published arrangement.

## Key Features
- Multipurpose seat cups accept DOE and 222 cartridge styles.
- Bead blasted exterior and passivated interior/exterior surfaces.
- Swing bolt closure with stainless steel bolting and davit.
- Four nozzle layouts are available, including in-line and side in/bottom out.

## Applications
- Air & Gas
- Desalination
- Coolant
- Water
- Electronics
- Coatings
- Oil & Gas
- Chemical
- Pulp & Paper
- Power
- Marine
- Equipment

## Specifications
- **inlet outlet:** 3" Flange - 20" Flange*
- **dirty drain:** 2"NPT*
- **clean drain:** 2"NPT*
- **vent:** ½" NPT*
- **gauges:** ½" NPT
- **standard configuration note:** *Indicates standard configuration
- **material construction:** Carbon Steel, Stainless 304, Stainless 316, Duplex 2205, Super Duplex 2507, Hastelloy C276, Monel 400
- **certifications:** ASME, PED, CRN, NSF 61
- **internal lining:** None, Ceramic, Epoxy, PFA, ETFE (i.e. Tefzel), ECTFE (i.e. Halar), PVDF (i.e. Kynar), Rubber Lined
- **special service:** None, Sour Service, Lethal Service
- **feature:** Vertical
- **max temperature:** 400°F (204°C)

## Options
- **configuration options:** A – Side in/side out*, B – In-Line, C – Side in/Bottom out, D – Side in/Side out, Same Side
- **finish options:** (-) – Bead Blast*, (-) – Passivation*, EP1 – Electro polish Inside/Outside, EP2 – Inside only, EP3 – Outside only
- **o ring options:** (-) – Buna-N*, ED – EPDM, VI – Viton, SI – Silicone, TEV – Teflon encapsulated Viton, TF - Teflon
- **head lift options:** Mechanical davit — confirm availability for the selected MP size, Hydraulic davit — confirm availability for the selected MP size, K3 – Hydraulic head lift, *Other head lift options available
- **filter configuration:** E1 – Double Open End (std)*, E2 –DOE with Gasket Ends, E3 –DOE with 1" Ext. Core, E4 – SOE Flat End 222 Open End, E5 – SOE Fin End 222 Open End, E8 – SOE Plastic Spring Top 222, E9 – SOE Plastic Spring Top
- **accessories:** Direct Reading Gauge, DP Gauge, Safety Relief Valves, Vent Valves, Drain Valves, Air Eliminator
- **standard configuration note:** *Indicates standard configuration

## Downloads
- [Datasheet](https://www.fil-trek.com/products/datasheets/Fil-Trek_Multi-Cartridge-Filter-Housing_MP_datasheet.pdf)
- [Installation, Operation, and Maintenance](https://www.fil-trek.com/products/datasheets/Fil-Trek_MP_IOM.pdf)

## Contact
- **sales@fil-trek.com** — all filtration product inquiries, projects, filter housings, and filtration systems
- **filters@fil-trek.com** — replacement filter media, filter elements, filter bags, hardware, and spare parts

## Links
- HTML: https://www.fil-trek.com/products/cartridge-housings/mp
- Markdown: https://www.fil-trek.com/products/cartridge-housings/mp.md
- Category: https://www.fil-trek.com/products/cartridge-housings
- Request Quote: https://www.fil-trek.com/contact?product=mp&category=cartridge-housings