# EGL Series Filter Housing

> Fil-Trek Cartridge Housings. Canonical page: https://www.fil-trek.com/products/cartridge-housings/egl

Category: Cartridge Housings
Series: EGL

## Overview
EGL is the industrial non-code version of the GL multi-cartridge housing. It uses the GL family’s cartridge arrangement and swing bolt access, with flanged or NPT connections. The shared GL datasheet identifies the E prefix as the non-code design; cartridge ends, seals and vessel materials are selected for the service.

## Key Features
- Industrial non-code design identified in the shared GL datasheet.
- Swing bolt closure for cartridge change-out.
- Separate clean and dirty drains.
- Alternative connection layouts and single open end cartridge arrangements are available.

## Applications
- Air & Gas
- Desalination
- Coolant
- Water
- Electronics
- Coatings
- Oil & Gas
- Chemical
- Pulp & Paper
- Power
- Marine
- Equipment

## Specifications
- **inlet outlet:** Flange or NPT
- **dirty drain:** 1/2" NPT on GL10 and smaller, 2" NPT on GL12 and larger
- **clean drain:** 1/2" NPT on GL10 and smaller, 2" NPT on GL12 and larger
- **vent:** ½" NPT on all sizes
- **gauges:** ½" NPT on all sizes
- **cover:** Flat top cover on GL10 and smaller (std)
- **closure:** Swing bolt closure, CSYZP
- **headlift:** Mechanical Davit on GL12 and larger (std), Hydraulic Davit on GL40 and larger (std)
- **legs:** Welded angle iron legs w/ footpads
- **standard pressure:** 150 PSIG, *Other pressures available
- **standard temperature:** 250°F (121.1°C), *Other temperatures available
- **standard configuration note:** *Indicates standard configuration
- **material construction:** Carbon Steel, Stainless 304, Stainless 316
- **certifications:** Non-Code
- **internal lining:** None
- **special service:** None
- **feature:** Vertical
- **max temperature:** 400°F (204°C)

## Options
- **configuration options:** (-) A – Side in/side out*, B – In-Line, C – Side in/Bottom out, D – Side in/Side out, Same Side
- **finish options:** (-) External paint "National Blue" (std for carbon steel housings)*, (-) Bead Blast (std for stainless steel 304 and 316)*, EP1 – Electro polish Inside/Outside, EP2 – Inside only, EP3 – Outside only, PP – Passivation
- **o ring options:** (-) BN – Buna-N*, ED – EPDM, VI – Viton, SI – Silicone, TEV – Teflon encapsulated Viton, TF - Teflon
- **filter configuration:** (-) E1 – Double Open End (std)*, E2 –DOE with Gasket Ends, E3 –DOE with 1" Ext. Core, E4 – SOE Flat End 222 Open End, E5 – SOE Fin End 222 Open End, E8 – SOE Plastic Spring Top 222, E9 – SOE Plastic Spring Top
- **accessories:** Direct Reading Gauge, DP Gauge, Safety Relief Valves, Vent Valves, Drain Valves, Air Eliminator
- **standard configuration note:** *Indicates standard configuration

## Downloads
- [Datasheet](https://www.fil-trek.com/products/datasheets/Fil-Trek_Multi-Cartridge-Filter-Housing_GL_datasheet.pdf)
- [Installation, Operation, and Maintenance](https://www.fil-trek.com/products/datasheets/Fil-Trek_EGL_IOM.pdf)

## Contact
- **sales@fil-trek.com** — all filtration product inquiries, projects, filter housings, and filtration systems
- **filters@fil-trek.com** — replacement filter media, filter elements, filter bags, hardware, and spare parts

## Links
- HTML: https://www.fil-trek.com/products/cartridge-housings/egl
- Markdown: https://www.fil-trek.com/products/cartridge-housings/egl.md
- Category: https://www.fil-trek.com/products/cartridge-housings
- Request Quote: https://www.fil-trek.com/contact?product=egl&category=cartridge-housings