# ALARIS SERIES (ALARIS)

> Fil-Trek Cartridge Filters. Canonical page: https://www.fil-trek.com/products/cartridge-filters/alaris

Category: Cartridge Filters
Series: ALARIS
Model format: `[SERIES]-[WRAP]-[MEDIA]-[MICRON]-[OD]-[LENGTH]-[CORE]-[END CAP]-[SEAL]-[OPTION]`
Example: `AS-PO-5-D1-40-PO-E2-BN-R`

## Overview
 High-efficiency pleated cartridge with exceptional dirt holding capabilities

## How It Works
Fluid flows outside-to-inside through layered depth-surface media; particles are retained within the matrix

## Applications
- RO pretreatment and SDI reduction
- Well intake sand/silt removal
- Chemical batch/transfer prefiltration (compatibility check)
- Catalyst fines and solids removal
- Coolant/cutting fluid fines control
- Whitewater and coating kitchen filtration
- Plant water and utility polishing
- Boiler feed/condensate particulate protection
- Cooling tower sidestream filtration
- DI/RO rinse water prefiltration
- CMP slurry trap
- Marine potable/ballast water particulate control

## Physical Specifications
- **flow direction:** Outside-to-inside
- **backwash-able:** No
- **outside diameter options:** 2.5", 2.65", 2.75", 4.5"
- **inner diameter options:** 1.0"
- **nominal length options:** 9.75", 10", 19.5", 20", 29.25", 30", 39", 40"
- **end cap options:** DOE W/ Gaskets, 222/Flat Single Open End, 222/Fin Single Open End, 226/Flat Single Open End, 226/Fin Single Open End, SOE W/ Plastic Spring & 222, SOE W/ Spring, 226 w/Spring, Direct Bond Gaskets, Custom
- **caps materials:** Polypropylene
- **cores materials:** Polypropylene, Polyester, Carbon Steel, Stainless 304, Stainless 316
- **gasket material options:** Buna-N, EPDM, Silicone, Viton, Teflon encap. Viton, Neoprene

## Media Specifications
- **media primary options:** Polypropylene, Polyester, Fiberglass
- **micron ratings:** 0.2, 0.5, 1, 3, 5, 10, 25, 50
- **efficiency percent:** Up to 99.98%
- **media rating:** Absolute, Nominal
- **beta ratio:** Up to 1000
- **changeout dp:** 15 PSID
- **burst pressure:** 35 PSID
- **max temperature:** 180°F (Polypropylene, Polyester), 250°F (Fiberglass)
- **approvals certifications:** FDA Listed

## Housing Compatibility
- Standard cartridge filter housings

## Competitor Cross-Reference
- Parker Fulflo Poly-Mate
- Parker Fulflo Poly-Mate Plus
- Jonell LiquiPleat E (JPME)
- Jonell LiquiPleat P (JPMP)
- Jonell LiquiPleat G (JPMG)
- AJR PPO
- AJR PPOW
- AMBF High Efficiency Pleated Cartridges
- AMBF Standard Efficiency Pleated Cartridges
- Graver PME
- Graver PMA
- Graver PMG

## Ordering
- Model format: `[SERIES]-[WRAP]-[MEDIA]-[MICRON]-[OD]-[LENGTH]-[CORE]-[END CAP]-[SEAL]-[OPTION]`
- Example: `AS-PO-5-D1-40-PO-E2-BN-R`

### Series codes
- **AS:** 90%
- **AG:** 99.98%

### Core codes
- **PO:** Polypropylene
- **PE:** Polyester
- **CS:** Carbon Steel
- **S4:** Stainless 304
- **S6:** Stainless 316

### Media codes
- **PO:** Polypropylene
- **PE:** Polyester
- **FG:** Fiberglass

### Seal codes
- **BN:** Buna-N
- **EP:** EPDM
- **SI:** Silicone
- **VI:** Viton
- **NP:** Neoprene
- **PL:** Plastisol

### Wrap codes
- **Blank:** Netted
- **H:** Hard Cage

### Cap codes
- **E2:** DOE W/ Gaskets
- **E4:** 222/Flat SOE
- **E5:** 222/Fin SOE
- **E6:** 226/Flat SOE
- **E7:** 226/Fin SOE
- **E8:** 222/Spring SOE
- **E9:** SOE W/Spring
- **E21:** 226 W/Spring
- **E16:** Direct Bond Gaskets
- **A:** Custom

### Od codes
- **D1:** 2.5"
- **D2:** 2.65"
- **D3:** 2.75"
- **D6:** 4.5"

### Length codes
- **10:** 10"
- **20:** 20"
- **30:** 30"
- **39:** 39"
- **40:** 40"
- **9.75:** 9.75"
- **19.5:** 19.5"
- **29.5:** 29.5"

### Option codes
- **R:** 18 MegaOHM Rinse

### Size codes
- **9.75:** OD 2.5, 2.65", ID 1", length 9.75"
- **10:** OD 2.5, 2.65, 4.5", ID 1", length 10"
- **19.5:** OD 2.5, 2.65", ID 1", length 19.5"
- **20:** OD 2.5, 2.65, 4.5", ID 1", length 20"
- **29.25:** OD 2.5, 2.65", ID 1", length 29.25"
- **30:** OD 2.5, 2.65", ID 1", length 30"
- **39:** OD 2.5, 2.65", ID 1", length 39"
- **40:** OD 2.5, 2.65", ID 1", length 40"

### Micron ratings
- 0.2, 0.5, 1, 3, 5, 10, 25, 50

## Contact
- **sales@fil-trek.com** — all filtration product inquiries, projects, filter housings, and filtration systems
- **filters@fil-trek.com** — replacement filter media, filter elements, filter bags, hardware, and spare parts

## Links
- HTML: https://www.fil-trek.com/products/cartridge-filters/alaris
- Markdown: https://www.fil-trek.com/products/cartridge-filters/alaris.md