# ELP Series Filter Housing

> Fil-Trek Bag Housings. Canonical page: https://www.fil-trek.com/products/bag-housings/elp

Category: Bag Housings
Series: ELP

## Overview
The ELP is the economical, non-code version of the highly configurable LP (Low Profile) multi-bag housing. The E prefix identifies its non-code design. Its layout permits bag removal without ladders or platforms. Side-in/side-out is the standard arrangement, with inline, bottom-outlet and same-side connections also listed in the datasheet.

## Key Features
- Swing-bolt closure for bag changeout
- Mechanical or hydraulic davit selected by vessel size
- Perforated support baskets; mesh-lined baskets available

## Applications
- Air & Gas
- Desalination
- Coolant
- Water
- Electronics
- Coatings
- Oil & Gas
- Chemical
- Pulp & Paper
- Power
- Marine
- Equipment

## Specifications
- **inlet outlet:** 2" Flange -18" Flange
- **dirty drain:** ½" NPT on all sizes*
- **clean drain:** 2" NPT on all sizes*
- **vent:** ½" NPT on all sizes*
- **gauges:** ½" NPT on all sizes*
- **basket:** 1⁄8" on 3⁄16" perforated plate*, *Other basket options available
- **headlift:** Mechanical Davit (std) for up to LP38*, Hydraulic Davit on LP40 and larger*
- **legs:** Angle Iron Legs with footpads*
- **closure:** Swing bolt closure*
- **standard pressure:** 150 PSI
- **standard temperature:** 250°F (121.1°C)
- **standard configuration note:** *Indicates standard configuration
- **material construction:** Carbon Steel, Stainless 304, Stainless 316
- **certifications:** Non-Code
- **internal lining:** None
- **special service:** None
- **feature:** Configurable
- **max temperature:** 400°F (204°C)

## Options
- **configuration options:** (-) A – Side in/side out*, B – In-Line side in/side out, C – Side in/Bottom out, D – Side in/Side out, Same Side
- **basket options:** 1/8" on 3/16" perforated basket*, MB____ - Mesh lined basket (insert mesh size in open space)
- **finish options:** (-) Paint "National Blue" (std for CS) *, (-) Bead Blast (std for SS304 or SS316) *, EP1 – Electro polish Inside/Outside, EP2 – Inside only, EP3 – Outside only, PP – Passivation
- **o ring options:** (-) Buna-N*, ED – EPDM, VI – Viton, SI – Silicone, TEV – Teflon encapsulated Viton
- **accessories:** Direct Reading Gauge, DP Gauge, Safety Relief Valves, Vent Valves, Drain Valves, Air Eliminator, Omega Springs, Balloon/Liquid Displacer, Bag Magnets
- **standard configuration note:** *Indicates standard configuration

## Downloads
- [Datasheet](https://www.fil-trek.com/products/datasheets/Fil-Trek_Multi-Bag-Filter-Housing_LP_datasheet.pdf)
- [Installation, Operation, and Maintenance](https://www.fil-trek.com/products/datasheets/Fil-Trek_ELP_IOM.pdf)

## Contact
- **sales@fil-trek.com** — all filtration product inquiries, projects, filter housings, and filtration systems
- **filters@fil-trek.com** — replacement filter media, filter elements, filter bags, hardware, and spare parts

## Links
- HTML: https://www.fil-trek.com/products/bag-housings/elp
- Markdown: https://www.fil-trek.com/products/bag-housings/elp.md
- Category: https://www.fil-trek.com/products/bag-housings
- Request Quote: https://www.fil-trek.com/contact?product=elp&category=bag-housings